Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Mandan, ND

Sommer Opener Gear & Sprocket Replacement in Mandan, ND

Stripped drive gears replaced so the motor moves the door again. Typical cost $125-$275.

Garage doors rarely fail at a convenient time. If you need Sommer opener gear & sprocket replacement in Mandan, ND, we can often come out the same day when a technician is available. Stripped drive gears replaced so the motor moves the door again. Whether your Sommer opener is a few years old or a few decades, we can diagnose it and tell you honestly whether it is worth repairing. Sommer openers, made in Germany, put the motor on a carriage that travels along the rail instead of hanging from the ceiling, so servicing them is a little different from a conventional opener.

Signs you need Sommer opener gear & sprocket replacement

  • The motor hums or runs but the chain or belt doesn't move
  • Grinding from inside the opener
  • Plastic shavings under the motor

Common causes

  • A heavy, out-of-balance door wearing the gear
  • Age and wear on the nylon gear

Safe checks before you call

  • Check the door's balance first. A heavy door will strip a new gear too.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

Our Sommer opener gear & sprocket replacement process

  1. Check the door's balance and springs
  2. Open the motor head and replace the gear and sprocket
  3. Grease the new gear
  4. Re-set the limits and force
  5. Test it through several cycles

Sommer Opener Gear & Sprocket Replacement cost in Mandan, ND

$125-$275Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Drive type: chain, belt, screw or wall-mount
  • Whether the fix is a part or a whole new opener
  • Remotes, keypads and smart accessories
  • Ceiling height and rail extensions

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Sommer services

Sommer Opener Gear & Sprocket Replacement in Mandan, ND

Cold weather thickens the grease in an opener's gears and rail, so a door that strains or reverses only in winter often needs force adjustment and cold-rated lubrication, not a new opener.

Our Sommer opener gear & sprocket replacement service covers Mandan (ZIP code 58554) and nearby towns including Bismarck (5.2 mi), Lincoln (10 mi), Hazen (47.3 mi) and Beulah (51.6 mi). Call (833) 435-8883 to book a visit in Mandan.

Sommer Opener Gear & Sprocket Replacement: frequently asked questions

How much does Sommer opener gear & sprocket replacement cost in Mandan, ND?

Sommer Opener Gear & Sprocket Replacement typically costs $125-$275 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Sommer opener gear & sprocket replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Sommer opener gear & sprocket replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Sommer warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where North Dakota or Mandan requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my opener?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the opener is near the end of its life, replace it. Most openers last 10 to 15 years. If yours is older than that, lacks photo eyes or rolling-code security, or needs a logic board or motor, a new opener is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Mandan, ND

Chamberlain Opener Circuit Board Replacement

Chamberlain is the retail line of The Chamberlain Group, sold at home centers. It uses the same Security+ 2.0 remote technology and myQ app as LiftMaster, so many accessories work with both brands.

Typical $175-$400

Overhead Door Commercial Garage Door Repair

Repairs for commercial sectional, overhead and service doors.

Typical $250-$1,000

Ideal Door Garage Door Installation

New steel, insulated, wood-look and carriage-style doors, measured and professionally installed.

Typical $1,200-$4,500

LiftMaster Opener Circuit Board Replacement

LiftMaster is the professional-installer brand of The Chamberlain Group. The color of the learn button on the motor unit shows which remotes are compatible (yellow on Security+ 2.0 models; purple, red, orange or green on older ones), and most current models work with the myQ app.

Typical $175-$400

Raynor Garage Door Sensor Repair

Photo-eye sensors realigned, rewired or replaced so the door closes reliably.

Typical $100-$250

Allstar Remote & Keypad Programming

Allstar openers are no longer made. Replacement remotes and many parts are still available, and we'll tell you when replacing the opener makes more sense.

Typical $50-$150

Haas Door Off-Track Garage Door Repair

Haas Door, based in Wauseon, Ohio, makes residential and commercial sectional and rolling doors.

Typical $175-$450

Martin Door Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Garaga Weather Seal Replacement

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $100-$300

Janus International Roll-Up Door Repair

Janus International is a major maker of roll-up doors for self-storage facilities.

Typical $150-$600

Clopay Garage Door Panel Replacement

Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

Typical $300-$900

CHI Overhead Doors Extension Spring Replacement

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $150-$350

Garage door stuck, noisy or broken?

Talk to a garage door technician in Mandan, ND now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote